Ok for packers but in the video roll center height it's not explain and for bellcranck my english is too poor for understand the explain.
For bellcrank I think It's like the rear suspension of a motorbike and the value is a ratio
For roll center height, I don't know where is the 0 in SD2?
0 is the ground or 0 is the wheel axle ?
Statistics: Posted by nonobecane — Sat Feb 21, 2015 6:13 pm
]]>
I think the option "packers" describes the length of the suspension when it is totally compressed, i.e. the minimum length possible for the suspension.
Statistics: Posted by mikado — Sat Feb 21, 2015 5:12 pm
]]>
- Section Axle : attnum name="roll center height"
- Section Anti-Roll Bar and Suspension: attnum name="bellcrank"
- Section Suspension : attnum name="packers"
Thanks for your help
I'm not happy of my settings, when it's Ok i share this car
Statistics: Posted by nonobecane — Sat Feb 21, 2015 10:43 am
]]>
@using existing hipoly models as base for remeshing:
i also thought about that, since basicly if you remesh it it scratchmade and not really copied (rather like using a 3d blueprint)
but on the other hand there might be complaints (i limited myself to using cc-licensed models like posted on blendswap, though since there also showed up some ripped meshes, i'm rather staying with things made from 2d for now.)
Statistics: Posted by W-E-C — Fri Aug 01, 2014 6:37 pm
]]>
For decals, stripes and racing number I test texture with this car :
I don't post it because I'm not sure it's ok, I don't really create this model :
- I remesh all the 3D model over a downloaded model (too many vertex on the original model).
- I used wheels and xml files from the Deckard Conejo 67 of chad3006 here :
Statistics: Posted by nonobecane — Sat Jul 19, 2014 6:11 am
]]>
]]>
]]>
]]>
Statistics: Posted by chad3006 — Thu Jul 17, 2014 1:44 pm
]]>
I agree with you for the window. I don't know how to fix the tints internal/external.
when i make a model with blender and export to ac3d sometimes it's works and sometime not (full transparency from interior and tint from exterior). I don't understand why.
Also problem of reflection when I export to ac3d the wheel present in the source (.../data/objects/wheel0.blend).
For the separate category, I don't know how to use a robot.
For exemple I use the SD r5801 with the car "sc-kanagawa-z35gts". She don't have robot and I don't know how tu use robots with this car.
I don't remenber where, but i read somewhere whe must recompil SD for each robots. Not ?
Statistics: Posted by nonobecane — Thu Jul 17, 2014 5:02 am
]]>
Also, why the seperate category? This means you can't get the usual robots to race the car...
Simon
Statistics: Posted by mungewell — Wed Jul 16, 2014 6:58 pm
]]>
also operating load is important
categorie :
car :
for download, user = anonymous
Statistics: Posted by nonobecane — Wed Jul 16, 2014 6:23 pm
]]>
If you already have the Milano Leggaro, you probably won't find much differences between that and my Consultina in the suspension area. I'm certainly no expert at car setups, but I'd recommend you just keep making adjustments to "springs", "anti-roll bar", and "stiffness," until you find what you are looking for.
Statistics: Posted by chad3006 — Wed Jul 16, 2014 12:35 pm
]]>
I 've allready start my suspension settings with your milano-legaro (approximatively the same mass).
I move a lot of suspension settings, I think i must restart probably with your spirit-consultina.
Thank you
Statistics: Posted by nonobecane — Wed Jul 16, 2014 6:24 am
]]>
]]>