Speed Dreams Community

proposed change on nsx - longer bonnet - shorter roof

nsx_bearb.jpg

At all great work. Downloaded the car files, will test them and submit them to SVN.

The 570 seems to be fine The SC 360 has a texture mapping prob now at the side

sc-360.png

@aeggy: i assume you mean the smaller vents on the sides of the front-bumper. i changed them because on the stock F360 they are much smaller than the ones on the GT2 model.
However if you and the others don't like it then i'll change it back

- - -

edit: deleted old files

Hi,

thanks for your feedback. I will test the other details.

It seems there are two versions of the F360 Challenge Stradale. One has bigger vents at the front-bumper:
http://www.automobilesreview.com/pictur ... le-06.html

No problem using the version with smaller vents but then we have a mapping problem with all 7 existing skins. That change is possible after 2.0 but not for now - it is to much work. So we can think about it for SD 2.1

proposed changes on the ls1-vulture: broader fenders + side windows

ls1-vette6.jpg

- - -

proposed changes on the ls2-boxer-96: new roof and a bit of tweaking around the front bumper

ls2-boxer.jpg

edit: deleted old files

btw. @aeggy: the gt4 is not from me, i used the one from the SC-carset an added some wings for the LS-version

OW MY NUTBLADDER!!!!

That Vulture looks solidly HARDCORE, man, thumbs up through the freakin' roof.

Your ability to make low-poly models realistic is truly ace.

@ Haruna: The car was allready well modeled, i just made some adjustments

- - -

i also made the zentek broader, however i find that the front wheels are pretty far out, would it be a problem to move them 1 or 2 cm to the inside?
zentek_wheel.jpg

If it's only a cm or two, then it should be fine. Handling should not change too much.

edit: deleted old files