OMGWTFBBQ USR ROBOT SETUP GUIDE~!?

[mungewell]

[kilo]

Speed limiter may be "ON"

[mightymariner]

Works fine when I drive it, but is the car being in the MPA1 class going to make any difference?

[Chazlington92]

Sorry to bring an old thread back from the grave, but can you ADD IN any of these sections, to modify the AI further?

I'm running a Championship soon using JUST SIMPLIX, as I don't like USR's habit of going off, then hugging the wall for the rest of the lap...

Thanks in advance,
Chaz

[Cobb]

I have a problem with cars run wide and off on turn entry because there clipping the grass just before turn in.
I've tried bump caution (because its on a slope) and I've tired ext margin. Neither have worked, what can I use to keep the cars away from the edge of the track?

Also is there somewhere where I can see that the AI is indeed using the setup I've created?

[Haruna]

You'd need less steer gain.

[Cobb]

Thanks Haruna will try that out. I have managed to get them to stay on the track using ext margin, turned out I forgot to half the dfs. The issue now is that in a pack they cannot make some of the corners, Ill try the steer gain and see if that helps otherwise I might tweak the factors related to pack driving unless you know of any other areas I could alter for that?